[PVE-User] Error setting autonegotiation off on X710

[José Manuel Giner]

Hello, we want to change the configuration of one of the ports of an
X710-DA4 network card, so that it works to 1G FD without
auto-negotiation. But received error.

Any idea?


***@server:~# ethtool enp9s0f2
Settings for enp9s0f2:
Supported ports: [ ]
Supported link modes: 1000baseT/Full
1000baseKX/Full
10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
1000baseKX/Full
10000baseT/Full
1000baseX/Full
10000baseSR/Full
10000baseLR/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Other
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
***@server:~#


***@server:~# ethtool -s enp9s0f2 speed 1000 duplex full autoneg off
Cannot set new settings: Operation not supported
not setting speed
not setting duplex
not setting autoneg
***@server:~#


***@server:~# mii-tool enp9s0f2
SIOCGMIIPHY on 'enp9s0f2' failed: Operation not supported
***@server:~#